BG
EN
ЦПУ система
Фирмата предлага PC-базирана ЦПУ система с възможност за управление до 8 оси. Системата може да управлява както аналогови, така и цифрови сервоуправления по CanOpen стандарт.
- До 8 оси, 5-осово синхронно движение
- 5-осова винтова интерполация G02/G03
- Поддръжка на допълнителни синхронни оси
- Capacitive trace control
- Plasma voltage trace control
- Laser beam control
- PC based CNC
- Linux Operating System
- LAN (Local area network)
- Graphical interface и Graphic preview
- Soft PLC
- TFT display
General Characteristics
| FEEDBACK INPUTS | 8 for up to 5 axes + Spindle encoder + Electronic handwheels |
|---|---|
| ANALOG INPUTS | 8 |
| ANALOG OUTPUTS | 8 |
| LINEAR INTERPOLATION | Up to 5 axes simultaneously |
| CIRCULAR INTERPOLATION | 2D |
| MULTIPLICATION OF FEEDBACK PULSES | Up to x4 |
| RESOLUTION BY MACHINE PARAMETER | Up to 0.0001 mm / 0.00004 |
| SINGLE-PHASE POWER SUPPLY | 220 VAC |
| AXIS FEEDRATE | 0.0001 mm/min. up to 100 m/min. |
| MAXIMUM TRAVELS | ± 99 999.9999 mm / 4000 |
Display
| MONITOR OPTIONS | 15" LCD VGA output |
|---|---|
| OPERATOR PANEL | Custom design |
| GRAPHICS | Tool paths Preview |
| SIMULATION | Preview |
| DATE/TIME | Permanent with battery back-up |
Operation
| EDITOR | Interactive |
|---|---|
| MANUAL OPERATION | Movement by electronic handwheels (3) Integrated JOG panel Feedrate / override switch |
| OPERATION MODES | JOG Cycle by cycle Automatic MDI STEP |
Other Characteristics
| COMMUNICATIONS | Ethernet (SSH, FTP) RS-232C Interface (V24) RS-422 Interface Load / download of ISO programs |
|---|---|
| DIAGNOSTICS | Programming, execution and internal circuitry errors Interface and peripheral transmission errors Input / output status Internet remote control and diagnostics |
| INPUTS / OUTPUTS | 4 analog inputs ±10V, 4 analog inputs 0-10V 8 analog outputs for axes ±10V 72 digital inputs 42 digital outputs |
| I/O 24 VCC | 24 optochannels / 8 relays |
